ZL 10 mm, TG 6.2 mm, HD 60 - 120 mm
SE 699-2-50
| Tool Type |
DRI |
Tool no. |
Z |
ID |
|
| Tool set glue joint profile (pos.) mounted on arbor |
RL |
1. 2 |
2/2 |
426086 |
|
| Tool set glue joint counter profile (neg.) mounted on arbor |
LL |
1. 2 |
2/2 |
426087 |
|
| Tool set glue joint - profile splitting profile pos. monted on arbor |
RL |
1. 2 |
2/2 |
426088 |
|
| Tool set glue joint - profile splitting profile neg. monted on arbor |
LL |
1. 2 |
2/2 |
426089 |
|
| Tool set glue joint - profile splitting profile neg. monted on arbor |
RL |
3. 4 |
2/2 |
426090 |
|
| Glue joint cutter set, positive (RL) or negative (LL) |
RL |
1. 2 |
2/2 |
126046 |
|
| Glue joint cutter set, negative |
RL |
3. 4 |
2/2 |
126047 |
|
Note:
When ordering always state wood thickness (HD). Example: HD 68 mm tool without any special information is mounted positive rh, negative lh. Always 1 tool set profile (pos.) and counter profile (neg.) glue joint required to produce the workpieces without reclamping. Cutter arbor see section 8 Clamping systems.RPM:
nmax = 12700 min-1
Spare knives
| Part-no. |
BEZ |
Tool no. |
ABM
mm |
QAL |
VE
PCS |
ID |
|
| 1 |
ProfilCut knife |
1 |
50.1x20.5x2 |
HW |
|
619230 |
|
| 1 |
ProfilCut knife |
2 |
50.1x20.5x2 |
HW |
|
619231 |
|
| 1 |
ProfilCut knife |
3 |
50.1x20.5x2 |
HW |
|
619232 |
|
| 1 |
ProfilCut knife |
4 |
50.1x20.5x2 |
HW |
|
619233 |
|
| 6 |
Turnblade knife |
1. 2. 3. 4 |
14.7x8x1.5 |
HW-30F |
10 |
005070 |
|
Spare parts
| Part-no. |
BEZ |
Tool no. |
ABM
mm |
ID |
|
| 2 |
Clamping wedge profiled |
1. 2. 3. 4 |
48x18x8.27 |
629107 |
|
| 3 |
Clamping screw, Torx® 25 |
|
M6x18,5 |
007818 |
|
| 4 |
Washer |
|
D9x1,2 |
006747 |
|
| 5 |
Torx® key |
|
Torx® 25 |
117504 |
|
| 7 |
Clamping wedge |
1. 2. 3. 4 |
13x18.75x8.27 |
009670 |
|
| |
Magnetic setting gauge |
|
0,3/0,8 |
005376 |
|
|
