|
 |
SẢN PHẨM
|
|
|
|
 |
| |
| Process controlled high frequency generator TH-594 |
|
|
| |
| Thông số kỹ thuật: |
Basic device for shrink fitting and removing shank tools
VN 799-0
| BEZ |
Tool Type |
Model |
for S
mm |
ID |
|
| High frequency generator |
Incl. coil and cover plates, max. tool diameter 50 mm |
ISG 3200 |
6 - 32 |
081904 |
|
| High frequency generator |
Incl. coil and cover plates |
ISG 2200 |
6 - 25 |
081903 |
|
– Fast clamping and unclamping of tungsten carbide and steel shanks.
– Short cooling time through localised, induction heating and integrated cooling system:
ISG 2200: 1 cooling location, 7.5 KW generator performance.
ISG 3200: 4 cooling locations, 11 KW generator performance.
– Adjusting the shrink coils to the required shank diameter by easy change of coils (only ISG 3200) and cover plates.
– ISG 2200 only for cylindrical shank tools.
– ISG 3200 also for shrink fitting and removing profile tools. For profile tools with tool diameters of more than 50 mm and shank diameters of 20 - 32 mm additional set ID 081942 required.
– Shrink fitting profile tools with a special induction coil that moves to the required position from below and after the heating sequence moves down again.
Accessories for ISG 2200/3200
| BEZ |
for S
mm |
ID |
|
| Holder for collet chucks HSK-E63 |
|
081946 |
|
| Holder for collet chucks HSK-F63 |
|
081932 |
|
| Holder for collet chucks SK40 |
|
081940 |
|
| Holder for collet chucks SK 30/ISO 30 |
|
081941 |
|
| Cooler |
12 - 16 |
081933 |
|
| Cooler |
20 - 25 |
081934 |
|
| Storage and cooling plate for removed tools |
|
081937 |
|
Accessories for fitting and removing profile tools with tool diameter > 50 mm, for device ISG 3200
| BEZ |
for S
mm |
ID |
|
| Additional set for profile tools with tool diameters > 50 mm |
20 - 32 |
081945 |
|
| Holder for collet chucks HSK-E63 |
|
081947 |
|
| Holder for collet chucks HSK-F63 |
|
081938 |
|
| Holder for collet chucks SK 40 |
|
081939 |
|
Additional set ID 081942 for ISG 3200 consists of:
1. Induction coil for profile tools
2. Stops (2 pieces)
Note: A suitable collet chuck holder for profile tools must be ordered. |
|
|
SẢN PHẨM CÙNG LOẠI |
|
| | 60 Sản phẩm | Trang : [<] 1 2 |
|
|
| |
|
|
|
|
